Stetzerizer Meter and 20 Filters

Stetzerizer Meter and 20 Filters

Free Shipping
On most orders over $250 within the continental USA
Quantity in stock
996 item(s)
20 Filters, 1 Meter
Market price:
Our Price:
Questions? Call 408-354-4262
- or -
  • Details
  • Ingredients
  • Send to friend
  • Related Products
  • Customers Also Bought
  • Customer feedback
Save 10%

Stetzerizer Meter and 20 Filters | Neutralize Dirty Electricity | Graham Stetzer Electric

Designed to measure home and office Power Quality*

This is the Graham-Stetzer "Microsurge" meter featured in medical journals and other publications.*

Designed to measure home and office Power Quality*

20 filters is the average number of filters to clean up an average home. We recommend 15 for apartments. For an accurate estimate of how many filters you should buy, please read "How many Stetzerizer filters do I need."  Dave Stetzer recommends this number, and also highly recommends purchasing the Microsurge Meter, as it is critical for installing the filters in the most effective manner possible.*

This is the original, patented, innovative filter for 60HZ A/C power! Technology adapted from industrial applications designed to protect machinery and equipment finally available to consumers to protect the health of their families!*

As mentioned in many publications, medical journals, and testimonials worldwide, the Stetzerizer filter is designed to remove harmful EM radiation in the form of high frequency voltage transients or harmonics. Commonly referred to as "dirty power," this electrical waste eminates from most of the electrical appliances, electronics, dimmer switches, fluorescent lighting and "energy efficient" compact fluorescent bulbs, computers, TVs, and almost anything apart from standard lightbulbs*


System Overview*
The STETZERiZER filter is based upon 100 year-old science and power engineering principles. Newly introduced is the design, which is focused on the needs of the customers in homes, offices, schools, etc. Filters have been extensively applied for decades by industrial users and the electric utility industry itself. The STETZERiZER filter is designed to filter harmonics and other high frequency current (trash) from the electrical environment, thereby reducing the potential for leakage into the human environment and creating additional trash in non-liner loads (televisions, computers, variable frequency drives, energy-efficient lighting, etc.).*

The high frequency current (call many names such as dirty power, electrical polution, noise, harmonics, trash, hash, transients, etc) on the neutral wire in the electrical system is positioned to return directly to the power system via the feeder neutral to the substation, and possibly beyond. However, as is often the case, the utility feeder neutral is not adequately sized (as required by law). If this is the case, much of the return current will flow through the ground rather than the feeder neutral. Under these conditions, the STETZERiZER filters still provide benefits, but utility companies should be taking the necessary steps for public safety by updating power lines, providing larger, higher-strand neutral returns to handle the high frequencies.*

At 60 Hz the filters act as capacitors and normally improve the power factor of the customer load, which are normally slightly inductive.*

Typical Home Installation*
Filters are designed to be installed throughout the home in a pattern that corresponds to the distributed nature of the need. For example, installing two filters (or one Stetzerizer power strip) close to a desktop computer or a television is normally appropriate and effective. Installing filters, normally from two to six, close to the input power panel is recommended to address high frequency currents entering on the power lines. The total number of filters required depends on the size of the home, the amount of electrical equipment, and the quality of the power from the grid. Twenty filters are normally adequate for a "typical" house.*

Installing an inadequate number of filters tends to result in overloaded filters, leading to an ineffective solution. The preferred installation method is to be guided by the STETZERiZER Microsurge Meter, which measures the amount of high frequency energy present. Readings of 30 or lower indicate an acceptable environment, while readings of 50 or higher indicate a need for additional filters. Not everyone is able to achieve readings under 30. *

The best practice is to use the "20% rule." When adding a second filter to same circuit, you should see a 20% reduction in the reading on the meter. For example, if your initial reading with no filters is 750 G/S units, and then after 1 filter is installed it is reduced to 50. You should try installing a second filter to the same location (electrical circuit) and the reading should drop to 40 or below. If the reading only drops to 47 for example, it would be more effective, and cost-effective, to possibly use that filter somewhere else where it can reduce the reading by 20%*

This set of 20 will effectively filter an average size home or office. If you have a large home or office, or a large number of EMF high frequency noise producers, you may need additional EMF high frequency noise filters. North American plug style only.*


Microsurge Meter Design Criteria *
Microsurge meters were specifically deigned as a companion to the STETZERiZER filters. The meters measure the level of harmful electromagnetic "energy" present, and their primary use is to guide effective filter installation. Microsurge meters are low cost, robust, and easy to use by non-technical people. The meters were designed to measure harmonics and other high frequency "energy" present, which are the frequencies most detrimental to human health. The meters effectively ignore the effects of 60 Hz power and other lower, less harmful frequencies. Specifically, the meter measures the average magnitude of the changing voltage as a function of time (dV/dt), which naturally emphasizes transients and other high frequency phenomena that change rapidly with time. The measurements of dV/dt read by the meter are defined as G-S (Graham-Stetzer) units (since no standard term is available). The G-S units are a measure of "harmful energy" which is a function of frequency, or more generally, rate of change of voltage or dV/dt.*

Using the Microsurge Meter for a Typical Home Installation Microsurge meters measure the levels of safe, borderline, or dangerous levels of "energy" present. These levels are conveniently shown on the back of the meter for reference. These levels have been developed through research (much of it in Russia and neighboring countries) and confirmed by experience in North America. The levels have been adopted by the Sanitory Stations (Health Departments) of the Republic of Kazakhstan.*

Starting from points that typically have the highest readings such as the power input panel, computers, and televisions, the meter is used to measure the initial levels of G-S energy and reduction as filters are added. Once the G-S levels are acceptable at one location, the process should be repeated at the next location. After the installation of the filters is complete, a final confirmation of the G-S levels should be performed throughout the house*

Stetzerizer Meter and 20 Filters | Neutralize Dirty Electricity | Graham Stetzer Electric

Neutralize Dirty Electricity 

20 filters

1 Meter

This field is required
A valid email is required
A valid email is required
This field is required
There have been no reviews

Add your own review
  • Disclaimer

*Your results may vary from those listed above.

*These statements have not been evaluated by the Food and Drug Administration.
*This product is not intended to diagnose, treat, cure or prevent any disease.

Since we do not know everything about your medical history and medications, please consult with your health care practitioner before implementing any new protocols and supplements. Do not construe any information listed on this site as a substitute for actual medical advice. The info you receive from us is not intended to replace medical advice by your doctor. Forrest Health, Inc. does not dispense medical advice, prescribe, or diagnose illness. We offer nutritional programs and supplements that support your health. The views and nutritional advice expressed by Forrest Health, Inc. are not intended to be a substitute for conventional medical service. If you have a medical condition, see your physician of choice.